Build Outdoor Structures That Hold Up
Decking Services in Lansdale for homeowners needing stable outdoor space after rotted boards or unsafe railings appear
Taylored For You Construction, LLC provides decking services in Lansdale for homeowners whose existing decks show soft spots, loose railings, or boards that splinter underfoot. You may notice posts that shift when leaned against, stairs that feel uneven, or fasteners that have rusted through. A properly built deck extends your living area outdoors and holds up through freeze-thaw cycles, summer storms, and regular use.
Deck construction starts with digging footings below the frost line and setting posts in concrete. Beams are bolted to the posts, joists are hung level with galvanized hangers, and decking boards are fastened with screws or hidden clips. Railings must meet height and spacing codes to prevent falls. Flashing is installed where the ledger board attaches to the house to keep water from entering the structure.
If your current deck feels unsafe or you want to add outdoor space for grilling and seating, contact the crew to review site conditions and design options.
Footings, Framing, and Material Durability
Your deck project begins with a layout that marks post locations and checks for underground utilities. You will see augers dig holes at least 42 inches deep to reach undisturbed soil below the frost line. Concrete is poured into each hole, and posts are set plumb using temporary bracing. Once the concrete cures, beams are lag-bolted to the posts and checked for level.
Joists are spaced 16 inches on center for standard decking or 12 inches for composite materials that require closer support. Decking boards run perpendicular to the joists, and gaps between boards allow water to drain and wood to expand. You will notice consistent spacing and clean cuts around posts and corners. Taylored For You Construction, LLC uses stainless steel or coated fasteners that resist corrosion from rain and snow.
Railings are assembled with balusters spaced no more than four inches apart to meet safety codes. Stair stringers are notched precisely so each tread sits level. Pressure-treated lumber is used for structural members, while composite or cedar boards can be chosen for decking and railings based on maintenance preferences. The finished deck stands firm, drains water, and provides a flat surface for furniture and foot traffic.
What Homeowners Ask About Deck Projects
Questions often focus on footing depth, material longevity, and how railings meet local safety standards.
What footing depth is required in Lansdale?
Footings must extend below the frost line, typically 42 inches in this area, to prevent posts from heaving when the ground freezes and thaws.
How do I choose between pressure-treated lumber and composite decking?
Pressure-treated lumber costs less and can be stained or sealed, while composite resists rot and splintering but requires closer joist spacing and costs more upfront.
When should I replace an existing deck instead of repairing it?
You should replace it if the ledger board shows rot, posts move at the base, or joists sag between supports, since these indicate structural failure that spot repairs cannot fix.
Why does flashing matter at the ledger board?
Flashing diverts water away from the connection between the deck and your home, preventing rot in the rim joist and siding that can weaken the entire structure.
What railing height is required by code?
Railings must be at least 36 inches high for decks more than 30 inches above grade, with balusters spaced close enough that a four-inch sphere cannot pass through.
Taylored For You Construction, LLC handles deck projects from permit to final inspection, ensuring footings are deep, framing is square, and railings meet code. Contact the team in Lansdale to discuss your lot slope, sun exposure, and how the deck will connect to your home.